[GEM-EXEC] 
[ELLI-X86] [SYS] Hauki USB Core Loaded.
[ELLI-X86] => function () {
[ELLI-X86]     [native code]
[ELLI-X86] }
[HOST] Injection complete.
[HOST] Firing the Ethernet Takeover Sequence...
[ELLI-X86] > globalThis.USB.bindNetwork()
[ELLI-X86] globalThis.USB.bindNetwork()
[ELLI-X86]
[ELLI-X86] [EHCI] Executing Surgical Target Acquisition on RTL8153...
[ELLI-X86]  -> 1. Hard-Routing Root -> Hub 1 (Address 1)
[ELLI-X86]  -> 2. Hard-Routing Hub 1 -> Hub 2 (Address 2)
[ELLI-X86]  -> 3. Supplying 5V Power to Terminus Port 4 (RTL8153)...
[ELLI-X86]  -> 4. WAITING 3.0 SECONDS FOR GIGABIT PHY FIRMWARE TO BOOT...
[ELLI-X86]  -> 5. Extracting RTL8153 to Address 3...
[ELLI-X86]
[ELLI-X86] === RTL8153 TARGET ACQUIRED ===
[ELLI-X86]  -> VID: 0x0BDA PID: 0x8153
[ELLI-X86]  -> Extracting Factory MAC Address...
[ELLI-X86]     [C"] MAC ADDRESS: 000001
[ELLI-X86]  -> Parsing Internal Configuration Endpoints...
[ELLI-X86]    [Endpoint] BULK IN  (RX) | Address: 0x81 | MaxPkt: 512
[ELLI-X86]    [Endpoint] BULK OUT (TX) | Address: 0x02 | MaxPkt: 512
[ELLI-X86]
[ELLI-X86]  -> Sending SET_CONFIGURATION 1 (Booting Network Core)...
[ELLI-X86]
[ELLI-X86] [VICTORY] RTL8153 Online! Data Engine ready for UDP frames.
[ELLI-X86] => RTL_READY
...     if (epOut !== 0) {
...         sys.serial("
[VICTORY] RTL8153 Online! Data Engine ready for UDP fr
ames.
");
if (epOut !== 0) {
...         return "RTL_READY";
sys.serial("
[VICTORY] RTL8153 Online! Data Engine ready for UDP frames
.
");
...     }
return "RTL_READY";
...
}
...     return "ERR_NO_ENDPOINTS";
... };
return "ERR_NO_ENDPOINTS";
... EOF
};
... EOF
[SYS] Hauki USB Core Loaded.
=> function () {
[native code]
}
> globalThis.USB.bindNetwork()
globalThis.USB.bindNetwork()
[EHCI] Executing Surgical Target Acquisition on RTL8153...
-> 1. Hard-Routing Root -> Hub 1 (Address 1)
-> 2. Hard-Routing Hub 1 -> Hub 2 (Address 2)
-> 3. Supplying 5V Power to Terminus Port 4 (RTL8153)...
-> 4. WAITING 3.0 SECONDS FOR GIGABIT PHY FIRMWARE TO BOOT...
-> 5. Extracting RTL8153 to Address 3...
=== RTL8153 TARGET ACQUIRED ===
-> VID: 0x0BDA PID: 0x8153
-> Extracting Factory MAC Address...
[C"] MAC ADDRESS: 000001
-> Parsing Internal Configuration Endpoints...
[Endpoint] BULK IN  (RX) | Address: 0x81 | MaxPkt: 512
[Endpoint] BULK OUT (TX) | Address: 0x02 | MaxPkt: 512
-> Sending SET_CONFIGURATION 1 (Booting Network Core)...
[VICTORY] RTL8153 Online! Data Engine ready for UDP frames.
=> RTL_READY
>